TY - JOUR AU - Kapila, S. AU - Sachdeva, R. PY - 1989 DA - 1989// TI - Mechanical properties and clinical applications of orthodontic wires JO - Am J Orthod Dentofacial Orthop VL - 96 UR - https://doi.org/10.1016/0889-5406(89)90251-5 DO - 10.1016/0889-5406(89)90251-5 ID - Kapila1989 ER - TY - JOUR AU - Klump, J. P. AU - Duncanson, M. G. AU - Nanda, R. S. AU - Currier, G. F. PY - 1994 DA - 1994// TI - Elastic energy/stiffness ratios for selected orthodontic wires JO - Am J Orthod Dentofacial Orthop VL - 106 UR - https://doi.org/10.1016/S0889-5406(94)70083-4 DO - 10.1016/S0889-5406(94)70083-4 ID - Klump1994 ER - TY - JOUR AU - Iijima, M. AU - Muguruma, T. AU - Brantley, W. A. AU - Mizoguchi, I. PY - 2011 DA - 2011// TI - Comparisons of nanoindentation, 3-point bending, and tension tests for orthodontic wires JO - Am J Orthod Dentofacial Orthop VL - 140 UR - https://doi.org/10.1016/j.ajodo.2009.11.015 DO - 10.1016/j.ajodo.2009.11.015 ID - Iijima2011 ER - TY - JOUR AU - Verstrynge, A. AU - Van Humbeeck, J. AU - Willems, G. PY - 2006 DA - 2006// TI - In-vitro evaluation of the material characteristics of stainless steel and beta-titanium orthodontic wires JO - Am J Orthod Dentofacial Orthop VL - 130 UR - https://doi.org/10.1016/j.ajodo.2004.12.030 DO - 10.1016/j.ajodo.2004.12.030 ID - Verstrynge2006 ER - TY - STD TI - Brantley W. Orthodontic wires. In: Brantley W, Eliades T, editors. Orthodontic materials. Stuttgart–New York: Thieme; 2001. p.78–100. ID - ref5 ER - TY - BOOK PY - 2002 DA - 2002// TI - Metallic materials—instrumented indentation test for hardness and materials parameters PB - International Organization for Standardization CY - Geneva ID - ref6 ER - TY - JOUR AU - Alcock, J. P. AU - Barbour, M. E. AU - Sandy, J. R. AU - Ireland, A. J. PY - 2009 DA - 2009// TI - Nanoindentation of orthodontic archwires: the effect of decontamination and clinical use on hardness, elastic modulus and surface roughness JO - Dent Mater VL - 25 UR - https://doi.org/10.1016/j.dental.2009.03.003 DO - 10.1016/j.dental.2009.03.003 ID - Alcock2009 ER - TY - JOUR AU - Iijima, M. AU - Muguruma, T. AU - Brantley, W. AU - Choe, H. C. AU - Nakagaki, S. AU - Alapati, S. B. PY - 2012 DA - 2012// TI - Effect of coating on properties of esthetic orthodontic nickel-titanium wires JO - Angle Orthod VL - 82 UR - https://doi.org/10.2319/021511-112.1 DO - 10.2319/021511-112.1 ID - Iijima2012 ER - TY - JOUR AU - Parenti, S. I. AU - Guicciardi, S. AU - Melandri, C. AU - Sprio, S. AU - Lafratta, E. AU - Tampieri, A. PY - 2012 DA - 2012// TI - Effect of soft drinks on the physical and chemical features of nickel-titanium-based orthodontic wires JO - Acta Odontol Scand VL - 70 UR - https://doi.org/10.3109/00016357.2011.575083 DO - 10.3109/00016357.2011.575083 ID - Parenti2012 ER - TY - JOUR AU - Xia, Y. AU - Bigerelle, M. AU - Marteau, J. AU - Mazeran, P. E. AU - Bouvier, S. AU - Iost, A. PY - 2014 DA - 2014// TI - Effect of surface roughness in the determination of the mechanical properties of material using nanoindentation test JO - Scanning VL - 36 UR - https://doi.org/10.1002/sca.21111 DO - 10.1002/sca.21111 ID - Xia2014 ER - TY - STD TI - Material property data. www.matweb.com Date Accessed: 24-March-2014 [database on the Internet]. Available from: www.matweb.com. Accessed: 24-03-2014 UR - http://www.matweb.com/ ID - ref11 ER - TY - STD TI - ASTM E384-11e1, Standard test method for Knoop and Vickers hardness of materials, ASTM International, West Conshohocken, PA, 2011, www.astm.org. UR - http://www.astm.org/ ID - ref12 ER - TY - JOUR AU - Pelsue, B. M. AU - Zinelis, S. AU - Bradley, T. G. AU - Berzins, D. W. AU - Eliades, T. AU - Eliades, G. PY - 2009 DA - 2009// TI - Structure, composition, and mechanical properties of Australian orthodontic wires JO - Angle Orthod VL - 79 UR - https://doi.org/10.2319/022408-110.1 DO - 10.2319/022408-110.1 ID - Pelsue2009 ER - TY - STD TI - Stainless Steel Grade 310 MoLN (UNS S31050). Available from: http://www.azom.com/article.aspx?ArticleID=8281. Accessed 8-4-2015 UR - http://www.azom.com/article.aspx?ArticleID=8281 ID - ref14 ER - TY - JOUR AU - Hunt, N. P. AU - Cunningham, S. J. AU - Golden, C. G. AU - Sheriff, M. PY - 1999 DA - 1999// TI - An investigation into the effects of polishing on surface hardness and corrosion of orthodontic archwires JO - Angle Orthod VL - 69 ID - Hunt1999 ER - TY - JOUR AU - Alfonso, M. V. AU - Espinar, E. AU - Llamas, J. M. AU - Ruperez, E. AU - Manero, J. M. AU - Barrera, J. M. PY - 2013 DA - 2013// TI - Friction coefficients and wear rates of different orthodontic archwires in artificial saliva JO - J Mater Sci Mater Med VL - 24 UR - https://doi.org/10.1007/s10856-013-4887-4 DO - 10.1007/s10856-013-4887-4 ID - Alfonso2013 ER - TY - JOUR AU - Iijima, M. AU - Brantley, W. A. AU - Baba, N. AU - Alapati, S. B. AU - Yuasa, T. AU - Ohno, H. PY - 2007 DA - 2007// TI - Micro-XRD study of beta-titanium wires and infrared soldered joints JO - Dent Mater VL - 23 UR - https://doi.org/10.1016/j.dental.2006.06.054 DO - 10.1016/j.dental.2006.06.054 ID - Iijima2007 ER - TY - STD TI - ASTM A240/A240M-14 Standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications.ASTM International, West Conshohocken, PA, 2004, www.astm.org. UR - http://www.astm.org/ ID - ref18 ER - TY - JOUR AU - Zhao, N. AU - Man, H. AU - Cui, Z. AU - Yang, X. PY - 2006 DA - 2006// TI - Structure and wear properties of laser gas nitrided NiTi surface JO - Surf Coat Tech VL - 200 UR - https://doi.org/10.1016/j.surfcoat.2005.04.043 DO - 10.1016/j.surfcoat.2005.04.043 ID - Zhao2006 ER - TY - JOUR AU - Shahdad, S. A. AU - McCabe, J. F. AU - Bull, S. AU - Rusby, S. AU - Wassell, R. W. PY - 2007 DA - 2007// TI - Hardness measured with traditional Vickers and Martens hardness methods JO - Dent Mater VL - 23 UR - https://doi.org/10.1016/j.dental.2006.10.001 DO - 10.1016/j.dental.2006.10.001 ID - Shahdad2007 ER - TY - JOUR AU - Zinelis, S. AU - Eliades, T. AU - Eliades, G. PY - 2010 DA - 2010// TI - A metallurgical characterization of ten endodontic Ni-Ti instruments: assessing the clinical relevance of shape memory and superelastic properties of Ni-Ti endodontic instruments JO - Int Endod J VL - 43 UR - https://doi.org/10.1111/j.1365-2591.2009.01651.x DO - 10.1111/j.1365-2591.2009.01651.x ID - Zinelis2010 ER - TY - JOUR AU - Frick, C. P. AU - Ortega, A. M. AU - Tyber, J. AU - Maksound, A. E. M. AU - Maier, H. J. AU - Liu, Y. PY - 2005 DA - 2005// TI - Thermal processing of polycrystalline NiTi shape memory alloys JO - Mat Sci Eng A VL - 405 UR - https://doi.org/10.1016/j.msea.2005.05.102 DO - 10.1016/j.msea.2005.05.102 ID - Frick2005 ER - TY - JOUR AU - Yoneyama, T. AU - Doi, H. AU - Hamanaka, H. AU - Okamoto, Y. AU - Mogi, M. AU - Miura, F. PY - 1992 DA - 1992// TI - Super-elasticity and thermal behavior of Ni-Ti alloy orthodontic arch wires JO - Dent Mater J VL - 11 UR - https://doi.org/10.4012/dmj.11.1 DO - 10.4012/dmj.11.1 ID - Yoneyama1992 ER - TY - JOUR AU - Suresh, S. AU - Giannakopoulos, E. PY - 1998 DA - 1998// TI - A new method for estimating residual stresses by instrumented sharp indentation JO - Acta Metal VL - 46 ID - Suresh1998 ER - TY - JOUR AU - Mencik, J. PY - 2007 DA - 2007// TI - Determination of mechanical properties by instrumented indentation JO - Meccanica VL - 42 UR - https://doi.org/10.1007/s11012-006-9018-6 DO - 10.1007/s11012-006-9018-6 ID - Mencik2007 ER - TY - JOUR AU - Hynowska, A. AU - Pellicer, E. AU - Fornell, J. AU - Gonzalez, S. AU - Van Steenberge, N. AU - Surinach, S. PY - 2012 DA - 2012// TI - Nanostructured β-phase Ti-31.0Fe-9.0Sn and sub-micron structured Ti-39.3Nb-13.3Zr-10.7Ta alloys for biomedical applications: microstructure benefits on the mechanical and corrosion performances JO - Mat Sci Eng C VL - 32 UR - https://doi.org/10.1016/j.msec.2012.07.016 DO - 10.1016/j.msec.2012.07.016 ID - Hynowska2012 ER -