Skip to main content

Advertisement

Progress in Orthodontics
Progress in Orthodontics Cover Image

Articles

Page 6 of 7

  1. The technology surrounding temporary skeletal anchorage devices has improved in leaps and bounds. However, no specific auxiliary exists for the intrusion of molars in conjunction with these devices and current...

    Authors: Riaan Foot, Oyku Dalci, Carmen Gonzales, Nour Eldin Tarraf and M Ali Darendeliler

    Citation: Progress in Orthodontics 2014 15:56

    Content type: Research

    Published on:

  2. The aim of this study is to calculate and compare the play and torque expression of 0.018 and 0.022 bracket slots when engaged with archwires of different size, cross section and material.

    Authors: Angela Arreghini, Luca Lombardo, Francesco Mollica and Giuseppe Siciliani

    Citation: Progress in Orthodontics 2014 15:53

    Content type: Research

    Published on:

  3. The aim of this study was to evaluate the effects of Class II malocclusion treatment with the Jasper Jumper and the Bionator, associated with fixed appliances.

    Authors: Leniana Santos Neves, Guilherme Janson, Rodrigo Hermont Cançado, Karina Jerônimo Rodrigues Santiago de Lima, Thaís Maria Freire Fernandes and José Fernando Castanha Henriques

    Citation: Progress in Orthodontics 2014 15:54

    Content type: Research

    Published on:

  4. Orthodontic palatal expansion appliances have been widely used with satisfactory and, most often, predictable clinical results. Recently, clinicians have successfully utilized micro-implants with palatal expan...

    Authors: Matt MacGinnis, Howard Chu, George Youssef, Kimberley W Wu, Andre Wilson Machado and Won Moon

    Citation: Progress in Orthodontics 2014 15:52

    Content type: Research

    Published on:

  5. Most orthodontists believe that fixed retainers are necessary to maintain ideal dental relationships. However, untoward side effects might result from their long-term placement. The aim of this study was to ev...

    Authors: Sepideh Torkan, Morteza Oshagh, Leila Khojastepour, Shoaleh Shahidi and Somayeh Heidari

    Citation: Progress in Orthodontics 2014 15:47

    Content type: Research

    Published on:

  6. The ideal built-in tip and torque values of the straight wire appliance reduce the need for wire bending and hence reduce chair time. The vertical position of the bracket on the tooth surface can alter the tor...

    Authors: Ahmadreza Sardarian, Shahla Momeni danaei, Shoaleh Shahidi, Sahar Ghodsi Boushehri and Allahyar Geramy

    Citation: Progress in Orthodontics 2014 15:50

    Content type: Research

    Published on:

  7. Studies that show frequencies of different orthodontic treatment protocols can be used as valuable parameters in the interpretation of treatment tendency with time. The purpose of this retrospective study was ...

    Authors: Guilherme Janson, Fábio Rogério Torres Maria and Roberto Bombonatti

    Citation: Progress in Orthodontics 2014 15:51

    Content type: Research

    Published on:

  8. There are controversial opinions about the effect of erupted second molars on distalization of the first molars. Most of the distalizing devices are anchored on the first molars, without including second molar...

    Authors: Alberto Caprioglio, Mauro Cozzani and Mattia Fontana

    Citation: Progress in Orthodontics 2014 15:49

    Content type: Research

    Published on:

  9. The objective of this study was to evaluate the treatment effects of Forsus™ Fatigue Resistant Device (FRD; 3M Unitek, Monrovia, CA, USA) in growing patients with Class II non-extraction malocclusions.

    Authors: Dean A Heinrichs, Imad Shammaa, Chris Martin, Thomas Razmus, Erdogan Gunel and Peter Ngan

    Citation: Progress in Orthodontics 2014 15:45

    Content type: Research

    Published on:

  10. The purpose of this retrospective study is to investigate the dentoalveolar and skeletal effects of two distalizing protocols featuring different anchorage systems used in patients with class II malocclusion: ...

    Authors: Lisa Mariani, Giuliano Maino and Alberto Caprioglio

    Citation: Progress in Orthodontics 2014 15:43

    Content type: Research

    Published on:

  11. This study aims to critically evaluate orthodontically induced external apical root resorption (OIEARR) in incisors of patients undergoing non-surgical orthodontic treatment of class II division 1 malocclusion...

    Authors: Long D Tieu, Humam Saltaji, David Normando and Carlos Flores-Mir

    Citation: Progress in Orthodontics 2014 15:48

    Content type: Review

    Published on:

  12. The aim of this study is to compare the dento-skeletal effects of rapid maxillary expansion (RME) and mixed maxillary expansion (MME), assessed on posteroanterior (PA) cephalograms.

    Authors: Letizia Perillo, Alfredo De Rosa, Francesco Iaselli, Fabrizia d’Apuzzo, Vincenzo Grassia and Salvatore Cappabianca

    Citation: Progress in Orthodontics 2014 15:46

    Content type: Research

    Published on:

  14. Extraction has now been accepted widely in various malocclusions including Angle's class II division 1. However, the levels of scientific evidence in orthodontic treatment planning have been weak, and it is un...

    Authors: Yongwen Guo, Xianglong Han, Hui Xu, Dongqing Ai, Huan Zeng and Ding Bai

    Citation: Progress in Orthodontics 2014 15:44

    Content type: Research

    Published on:

  17. The objective of this study is to evaluate the force-deflection behavior of beta-titanium alloy wires between two leveled and unleveled bracket alignment scenarios using a three-point bending test.

    Authors: Natalia Martins Insabralde, Thaís Poletti, Ana Cláudia Conti, Paula Vanessa Oltramari-Navarro, Murilo B Lopes, Carlos Flores-Mir and Marcio Rodrigues de Almeida

    Citation: Progress in Orthodontics 2014 15:42

    Content type: Research

    Published on:

  18. Fiber-reinforced polymer composite (FRPC) archwires could provide an esthetic solution to conventional orthodontic archwires. This study was carried out with the following aims: (1) to compare the sliding fric...

    Authors: Chai Kiat Chng, Kelvin Foong, Narayan H Gandedkar, Yiong Huak Chan and Chong-Lin Chew

    Citation: Progress in Orthodontics 2014 15:39

    Content type: Research

    Published on:

  19. The aim of this study was to compare displacements and stress after en masse retraction of mandibular dentition with lingual and labial orthodontics using three-dimensional (3D) finite element models (FEM).

    Authors: Luca Lombardo, Giuseppe Scuzzo, Angela Arreghini, Özge Gorgun, Yıldız Öztürk Ortan and Giuseppe Siciliani

    Citation: Progress in Orthodontics 2014 15:38

    Content type: Research

    Published on:

  20. Smartphone usage has spread to many settings including that of healthcare and dentistry with numerous potential and realized benefits. The ability to download custom-built software applications (apps) has crea...

    Authors: Mayuresh Jagannath Baheti and Nandlal Toshniwal

    Citation: Progress in Orthodontics 2014 15:36

    Content type: Research

    Published on:

  21. The aim of this prospective study was to compare root resorption after the leveling phase of treatment, performed by either super-elastic or conventional multi-stranded stainless steel arch wires.

    Authors: Kawa Alzahawi, Espen Færøvig, Pongsri Brudvik, Olav Egil Bøe and Maria Mavragani

    Citation: Progress in Orthodontics 2014 15:35

    Content type: Research

    Published on:

  22. A retrospective study was conducted to determine the cephalometric changes in a group of Class III patients treated with the inter-arch spring-loaded module (CS2000®, Dynaflex, St. Ann, MO, USA).

    Authors: Robert Vanlaecken, Michael O Williams, Thomas Razmus, Erdogan Gunel, Chris Martin and Peter Ngan

    Citation: Progress in Orthodontics 2014 15:32

    Content type: Research

    Published on:

  23. This study aims to compare the ‘Nuvola®’ system with ‘Fantasmino®’ system, examine their material properties, and define the indications for use of the aligners.

    Authors: Federica Ercoli, Michele Tepedino, Vincenzo Parziale and Cesare Luzi

    Citation: Progress in Orthodontics 2014 15:31

    Content type: Research

    Published on:

  24. Oral breathing and maxillary deficiency are often associated with steep mandibular plane angle, and retrognathic mandible compared with the faces of healthy controls. Some studies suggested that after rapid ma...

    Authors: Rosamaria Fastuca, Piero Antonio Zecca and Alberto Caprioglio

    Citation: Progress in Orthodontics 2014 15:40

    Content type: Research

    Published on:

  25. The purpose of this study was to determine the bond strength of different orthodontic bracket materials (ceramic, stainless steel, and titanium) as well as stresses developed in bracket-cement-enamel systems u...

    Authors: Shaymaa E Elsaka, Shaza M Hammad and Noha F Ibrahim

    Citation: Progress in Orthodontics 2014 15:33

    Content type: Research

    Published on:

  26. The purpose of this study is to evaluate the effect of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) and CPP-ACP with fluoride (CPP-ACP-F) on the shear bond strength (SBS) of orthodontic brackets...

    Authors: Kapil A Ladhe, Murlidhar R Sastri, Jyoti B Madaan and Ketan K Vakil

    Citation: Progress in Orthodontics 2014 15:28

    Content type: Research

    Published on:

  27. The daily life of patients suffering from orofacial pain is considerably impaired as compared to healthy subjects. The aim of this study was to investigate the influence of different categories of orofacial pa...

    Authors: Iacopo Cioffi, Stefania Perrotta, Lucia Ammendola, Roberta Cimino, Stefano Vollaro, Sergio Paduano and Ambrosina Michelotti

    Citation: Progress in Orthodontics 2014 15:27

    Content type: Research

    Published on:

  28. This study provides a vital insight in assessing the clinical and biochemical changes in interleukin (IL)-1β levels in peri-miniscrew crevicular fluid (PMCF) during the course of orthodontic tooth movement.

    Authors: Nitika Monga, Sushma Chaurasia, Om Prakash Kharbanda, Ritu Duggal and Moganty Raja Rajeswari

    Citation: Progress in Orthodontics 2014 15:30

    Content type: Research

    Published on:

  29. The aim of the survey was to obtain information on the treatment plan preferences, mechanics and characteristics of temporary anchorage device (TAD) application using a single case presented to orthodontists i...

    Authors: Goran Markic, Christos Katsaros, Nikolaos Pandis and Theodore Eliades

    Citation: Progress in Orthodontics 2014 15:29

    Content type: Research

    Published on:

  30. The detection and quantification of skeletal asymmetries is a fundamental component to diagnosis and treatment planning in orthodontics. The purpose of this study was to identify and quantify the characteristi...

    Authors: Derek A Sanders, Taranpreet K Chandhoke, Flavio A Uribe, Paul H Rigali and Ravindra Nanda

    Citation: Progress in Orthodontics 2014 15:26

    Content type: Research

    Published on:

  32. Although dental dilaceration disinclusion is an accepted treatment modality, few studies have evaluated the prognosis for dilacerated maxillary incisors and changes in clinical periodontal parameters still nee...

    Authors: Giampietro Farronato, Lucia Giannini, Guido Galbiati and Cinzia Maspero

    Citation: Progress in Orthodontics 2014 15:3

    Content type: Research

    Published on:

  33. This study aims to investigate, utilising micro-computed tomography (micro-CT) and histology, whether the topical application of nerve growth factor (NGF) and/or epidermal growth factor (EGF) can enhance perio...

    Authors: Francesco Furfaro, Estabelle SM Ang, Ricky R Lareu, Kevin Murray and Mithran Goonewardene

    Citation: Progress in Orthodontics 2014 15:2

    Content type: Research

    Published on:

  34. In this study we aimed at quantifying the possible errors which may occur when assessing specific reference planes and linear derivants on cephalometric radiographs traced manually and digitally. Furthermore, ...

    Authors: Giampietro Farronato, Sara Salvadori, Francesca Nolet, Alessandro Zoia and Davide Farronato

    Citation: Progress in Orthodontics 2014 15:1

    Content type: Short report

    Published on:

  35. Although using light-cured composites for bonding orthodontic brackets has become increasingly popular, curing light cannot penetrate the metallic bulk of brackets and polymerization of composites is limited t...

    Authors: Farzin Heravi, Saied Mostafa Moazzami, Negin Ghaffari, Javad Jalayer and Yasaman Bozorgnia

    Citation: Progress in Orthodontics 2013 14:49

    Content type: Research

    Published on:

  36. The purpose of this study was to assess the surface characterization and frictional resistance between stainless steel brackets and two types of orthodontic wires made of stainless steel and nickel-titanium al...

    Authors: Tahereh Hosseinzadeh Nik, Tabassom Hooshmand, Habibeh Farazdaghi, Arash Mehrabi and Elham S Emadian Razavi

    Citation: Progress in Orthodontics 2013 14:48

    Content type: Research

    Published on:

  41. The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasi...

    Authors: Cristina Grippaudo, Bruno Oliva, Anna Lucia Greco, Simone Sferra and Roberto Deli

    Citation: Progress in Orthodontics 2013 14:43

    Content type: Research

    Published on:

  45. The purpose of this study was to compare the shear bond strength and adhesive remnant index (ARI) at the enamel-bonding interface of precoated and conventionally bonded brackets, utilizing standardized procedu...

    Authors: Ulises A Guzman, Laurance Jerrold, Peter S Vig and Ahmad Abdelkarim

    Citation: Progress in Orthodontics 2013 14:39

    Content type: Research

    Published on:

  46. Bone density at the interradicular area plays an important role during orthodontic treatment. In view of this fact, the study was designed to quantitatively evaluate the bone density at the interradicular area...

    Authors: Tina Chugh, Sanjay V Ganeshkar, Ameet V Revankar and Abhay K Jain

    Citation: Progress in Orthodontics 2013 14:38

    Content type: Research

    Published on:

  47. Although much has been written on the implications of friction generated between orthodontic archwires and labial brackets, information on lingual brackets is still limited. Hence, we set out to investigate th...

    Authors: Luca Lombardo, Weronika Wierusz, Dominique Toscano, Roberto Lapenta, Andrea Kaplan and Giuseppe Siciliani

    Citation: Progress in Orthodontics 2013 14:37

    Content type: Research

    Published on:

  48. The study aims to compare the condylar position in patients with different anteroposterior sagittal skeletal relationships through a cone beam computed generated tomography (CBCT) imaging generated space analy...

    Authors: Jessica M Arieta-Miranda, Manuel Silva-Valencia, Carlos Flores-Mir, Ney A Paredes-Sampen and Luis E Arriola-Guillen

    Citation: Progress in Orthodontics 2013 14:36

    Content type: Research

    Published on:

  49. During orthodontic treatment, a low resistance to slide (RS) is desirable when sliding mechanics are used. Many studies showed that several variables affect the RS at the bracket-wire interface; among these, t...

    Authors: Riccardo Nucera, Antonino Lo Giudice, Giovanni Matarese, Alessandro Artemisia, Ennio Bramanti, Paolo Crupi and Giancarlo Cordasco

    Citation: Progress in Orthodontics 2013 14:35

    Content type: Research

    Published on:

  50. The smile perception of patients is not strictly related to standardized protocols and technical implications which certainly affect clinicians' decisions. The absence of maxillary lateral incisors could affec...

    Authors: Marco Rosa, Alessia Olimpo, Rosamaria Fastuca and Alberto Caprioglio

    Citation: Progress in Orthodontics 2013 14:34

    Content type: Research

    Published on:

Submit manuscript

Official journal of

  • sido logo

Annual Journal Metrics 2019

  • ISSN: 2196-1042 (electronic)

Advertisement