Skip to main content
Progress in Orthodontics
Progress in Orthodontics Cover Image

Articles

Page 3 of 9

  2. There is relatively little appreciation of the changes in maxillary-mandibular relationships occurring during adolescence among subjects with normal and increased overjet. The aim of this study was to assess d...

    Authors: Matoula Taloumtzi, Melisa Padashi-Fard, Nikolaos Pandis and Padhraig S. Fleming
    Citation: Progress in Orthodontics 2020 21:13
    Content type: Research Published on:

  3. To investigate and compare the gap (i.e. fit) and thickness of six aligner systems (Airnivol, ALL IN, Arc Angel, F22, Invisalign and Nuvola) using industrial computed tomography (CT). The null hypothesis was t...

    Authors: Luca Lombardo, Mario Palone, Mattia Longo, Niki Arveda, Michele Nacucchi, Fabio De Pascalis, Giorgio Alfredo Spedicato and Giuseppe Siciliani
    Citation: Progress in Orthodontics 2020 21:12
    Content type: Research Published on:

  4. To compare dentoskeletal changes produced by the maxillary splint headgear and cervical headgear appliance during the early phase of Class II treatment, specially the initial overjet and upper incisors position.

    Authors: José Augusto M. Miguel, Caterina Masucci, Luciana Quintanilha Pires Fernandes, Flavia Artese, Lorenzo Franchi and Veronica Giuntini
    Citation: Progress in Orthodontics 2020 21:11
    Content type: Research Published on:

  6. The aim of the present study was to assess if genetic polymorphisms in tooth agenesis (TA)-related genes are associated with craniofacial morphological patterns.

    Authors: Amanda Silva Rodrigues, Ellen Cardoso Teixeira, Leonardo Santos Antunes, Paulo Nelson-Filho, Arthur Silva Cunha, Simone Carvalho Levy, Mônica Tirre de Souza Araújo, Alice Gomes de Carvalho Ramos, Giuseppe Valduga Cruz, Marjorie Ayumi Omori, Mírian Aiko Nakane Matsumoto, Alexandre Rezende Vieira, Erika Calvano Küchler, Guido Artemio Marañón-Vásquez and Lívia Azeredo Alves Antunes
    Citation: Progress in Orthodontics 2020 21:9
    Content type: Research Published on:

  7. Correcting posterior crossbite in adult patients using nonsurgical methods may involve buccolingual tooth movement. Knowing the extent of the pretreatment alveolar bony dehiscences and fenestrations in the pos...

    Authors: Jin Young Choi, Kishore Chaudhry, Edwin Parks and Ji Hyun Ahn
    Citation: Progress in Orthodontics 2020 21:8
    Content type: Research Published on:

  8. The present study aimed to evaluate the effect of MOP over a 3-month period and to determine the influence of the number of perforations on the rate of canine retraction. In addition, the amount of pain and di...

    Authors: Neda Babanouri, Shabnam Ajami and Parisa Salehi
    Citation: Progress in Orthodontics 2020 21:7
    Content type: Research Published on:

  9. The objective was to analyze clinical, microbiological, and immunological periodontal parameters in patients in corrective orthodontic treatment.

    Authors: Mariana Umekita Shirozaki, Raquel Assed Bezerra da Silva, Fábio Lourenço Romano, Léa Assed Bezerra da Silva, Andiara De Rossi, Marília Pacífico Lucisano, Michel Reis Messora, Magda Feres and Arthur Belém Novaes Júnior
    Citation: Progress in Orthodontics 2020 21:6
    Content type: Research Published on:

  10. In dental implantology, the development of stability over time is a well-investigated topic. In case of orthodontic mini-implants, quantitative data for long-term stability is not available yet. This study aim...

    Authors: Manuel Nienkemper, Jan H. Willmann, Kathrin Becker and Dieter Drescher
    Citation: Progress in Orthodontics 2020 21:5
    Content type: Research Published on:

  11. Fluorescent agents are added to orthodontic adhesives with the aim of making them visible under ultraviolet (UV) light, which ensures the complete, safe removal of remnants after orthodontic treatment. However...

    Authors: Paulo Henrique Rossato, Edmilson Nobumito Kaneshima, Fábio Domingues, Thais Maria Freire Fernandes, Sandrine Bittencourt Berger and Paula Vanessa Pedron Oltramari
    Citation: Progress in Orthodontics 2020 21:4
    Content type: Research Published on:

  14. Fixed appliances have been the mainstream for orthodontic treatment, while clear aligners, such as Invisalign system, have become increasingly popular. The prevalence of apical root resorption (ARR) in patient...

    Authors: Yuan Li, Shiyong Deng, Li Mei, Zhengzheng Li, Xinyun Zhang, Chao Yang and Yu Li
    Citation: Progress in Orthodontics 2020 21:1
    Content type: Research Published on:

  15. Maxillary incisor protrusion is a prevalent dental deformity and is often treated by upper incisor intrusion and retraction. The mechanical loading triggers the resorption and apposition of the bone. Alveolar ...

    Authors: Seok Yoon Hong, Jeong Won Shin, Christine Hong, Vania Chan, Un-Bong Baik, Young Ho Kim and Hwa Sung Chae
    Citation: Progress in Orthodontics 2019 20:47
    Content type: Research Published on:

  16. To compare the clinical efficiency of premium heat-activated copper nickel-titanium (Tanzo Cu-NiTi) and NT3 superelastic NiTi during initial orthodontic alignment.

    Authors: Ezgi Atik, Hande Gorucu-Coskuner, Bengisu Akarsu-Guven and Tulin Taner
    Citation: Progress in Orthodontics 2019 20:46
    Content type: Research Published on:

  19. To assess the perceived facial changes in class II division 1, convex profile patients treated with functional followed by fixed orthodontic appliances.

    Authors: Mary-Eleni Zouloumi, Kleopatra Tsiouli, Simeon Psomiadis, Olga-Elpis Kolokitha, Nikolaos Topouzelis and Nikolaos Gkantidis
    Citation: Progress in Orthodontics 2019 20:42
    Content type: Research Published on:

  20. The aim of the study was to assess the accuracy of commercially available software in estimating anterior tooth root inclination from digital impressions of the crowns of the teeth.

    Authors: Panagiota Magkavali-Trikka, Demetrios J. Halazonetis and Athanasios E. Athanasiou
    Citation: Progress in Orthodontics 2019 20:43
    Content type: Research Published on:

  21. Growth and development can be determined by cervical vertebrae stages that were defined on the cephalometric radiograph. Artificial intelligence has the ability to perform a variety of activities, such as pred...

    Authors: Hatice Kök, Ayse Merve Acilar and Mehmet Said İzgi
    Citation: Progress in Orthodontics 2019 20:41
    Content type: Research Published on:

  22. Since the introduction of cone-beam computed tomography (CBCT) in dentistry, this technology has enabled distortion-free three-dimensional cephalometric analysis for orthodontic and orthognathic surgery diagno...

    Authors: Cinzia Maspero, Andrea Abate, Francesca Bellincioni, Davide Cavagnetto, Valentina Lanteri, Antonella Costa and Marco Farronato
    Citation: Progress in Orthodontics 2019 20:40
    Content type: Research Published on:

  24. The aim of this study was to evaluate the midpalatal suture maturation stages in adolescents and young adults using cone-beam computed tomography (CBCT).

    Authors: Ludy Marileidy Jimenez-Valdivia, Violeta Malpartida-Carrillo, Yalil Augusto Rodríguez-Cárdenas, Heraldo Luis Dias-Da Silveira and Luis Ernesto Arriola-Guillén
    Citation: Progress in Orthodontics 2019 20:38
    Content type: Research Published on:

  25. The aim of this prospective case series study is to assess the three-dimensional (3D) skeletal and soft tissue effects of the alternate rapid maxillary expansion and constriction (Alt-RAMEC) protocol in conjun...

    Authors: Mohammed Almuzian, Anas Almukhtar, Aman Ulhaq, Fahad Alharbi and M. Ali Darendeliler
    Citation: Progress in Orthodontics 2019 20:37
    Content type: Research Published on:

  26. Clear aligners (CA) are among the most chosen orthodontic therapies for patients who require an invisible treatment. Previous studies showed that the thermoforming process and the complexity of the intraoral e...

    Authors: Rosaria Bucci, Roberto Rongo, Carmine Levatè, Ambrosina Michelotti, Sandro Barone, Armando Viviano Razionale and Vincenzo D’Antò
    Citation: Progress in Orthodontics 2019 20:36
    Content type: Research Published on:

  27. The use of skeletal anchorage devices for maxillary protraction in patients with class III malocclusion due to deficiency in the middle third of the face has been shown to be a promising approach to treatment ...

    Authors: Ricardo Alves de Souza, José Rino Neto and João Batista de Paiva
    Citation: Progress in Orthodontics 2019 20:35
    Content type: Research Published on:

  28. Orthodontic treatment combined with a maxillomandibular advancement (MMA) can be an effective option for patients who need not only corrected occlusion but also facial rejuvenation. In this case series, two pa...

    Authors: Carmen Lorente, Federico Hernández-Alfaro, Maria Perez-Vela, Pedro Lorente and Teresa Lorente
    Citation: Progress in Orthodontics 2019 20:34
    Content type: Short report Published on:

  29. Correction of dentofacial deformities via orthodontics is an integral part of oral health as promotes optimal function, periodontal health, aesthetics and overall oral health-related quality of life. The aim o...

    Authors: Marianna Koufatzidou, Despina Koletsi, Eirini Iouliani Basdeki, Nikolaos Pandis and Argy Polychronopoulou
    Citation: Progress in Orthodontics 2019 20:33
    Content type: Research Published on:

  30. The aim of the current systematic review was to compare the radiologic effects of functional appliance Class II treatment compared to no treatment on the temporomandibular joint and its components.

    Authors: Karma Shiba Kyburz, Theodore Eliades and Spyridon N. Papageorgiou
    Citation: Progress in Orthodontics 2019 20:32
    Content type: Review Published on:

  31. Anxiety can cause difficulties during surgical procedures. The main objective of this study was to evaluate changes in patients’ anxiety and perceived pain levels after receiving audiovisual and verbal informa...

    Authors: Berra Calik Koseler, Hilal Yilanci and Sabri Ilhan Ramoglu
    Citation: Progress in Orthodontics 2019 20:29
    Content type: Research Published on:

  32. In the publication of this article [1], there is an error in the Materials and methods section.

    Authors: Annapurna Kannan and Sridevi Padmanabhan
    Citation: Progress in Orthodontics 2019 20:31
    Content type: Correction Published on:

    The original article was published in Progress in Orthodontics 2019 20:23

  34. The long-term evidence regarding failures of fixed retainers is limited and the aim of this cohort study was to assess the long-term risk of failure of one type of maxillary and two types of mandibular fixed l...

    Authors: Katharina E. Kocher, Meret C. Gebistorf, Nikolaos Pandis, Piotr S. Fudalej and Christos Katsaros
    Citation: Progress in Orthodontics 2019 20:28
    Content type: Research Published on:

  36. To introduce an orthodontic bracket debonding device capable of measuring debonding force clinically by a novel sensor mechanism

    Authors: Tamzid Ahmed, Norma Ab Rahman and Mohammad Khursheed Alam
    Citation: Progress in Orthodontics 2019 20:26
    Content type: Research Published on:

  37. To evaluate the three-dimensional (3D) changes after mandibular setback surgery (MSS) in skeletal Class III malocclusion using cone-beam computed tomography (CBCT) and a structured light-based scanner.

    Authors: Kyung-A Kim, Ye-Jin Chang, Su-Hyun Lee, Hyun-Joon An and Ki-Ho Park
    Citation: Progress in Orthodontics 2019 20:25
    Content type: Research Published on:

    The Correction to this article has been published in Progress in Orthodontics 2019 20:30

  38. The purpose of this study was to evaluate the treatment effectiveness of Carriere Distalizer in comparison to Class II intermaxillary elastics and Forsus.

    Authors: Kaifeng Yin, Eugene Han, Jing Guo, Toshihiko Yasumura, Dan Grauer and Glenn Sameshima
    Citation: Progress in Orthodontics 2019 20:24
    Content type: Research Published on:

  39. The aim of this trial was to comparatively evaluate Icon® resin infiltration and Clinpro™ XT varnish in restoring aesthetics of white spot lesions (WSLs) present post-orthodontic treatment.

    Authors: Annapurna Kannan and Sridevi Padmanabhan
    Citation: Progress in Orthodontics 2019 20:23
    Content type: Research Published on:

    The Correction to this article has been published in Progress in Orthodontics 2019 20:31

  40. To evaluate the risk of vertical alveolar bone loss (ABL) in mesialized mandibular permanent molars due to space closure in patients with unilateral second premolar agenesis. The contralateral side served as c...

    Authors: Nicolas Göllner, Jonas Winkler, Peter Göllner and Nikolaos Gkantidis
    Citation: Progress in Orthodontics 2019 20:22
    Content type: Research Published on:

  41. Among the recent modalities introduced to accelerate orthodontic tooth movement (OTM) is micro-osteoperforations (MOPs), in other words, bone puncturing. The aim of this split-mouth trial was to investigate th...

    Authors: Amira A. Aboalnaga, Mona M. Salah Fayed, Noha A. El-Ashmawi and Sanaa A. Soliman
    Citation: Progress in Orthodontics 2019 20:21
    Content type: Research Published on:

  42. To determine the discrepancy of crown-root morphology of central incisors among different types of skeletal malocclusion using cone-beam computed tomography (CBCT) and to provide guidance for proper torque exp...

    Authors: Xiao-ming Wang, Ling-zhi Ma, Jing Wang and Hui Xue
    Citation: Progress in Orthodontics 2019 20:20
    Content type: Research Published on:

  44. Orthodontic bonding and debonding procedures involve risk of damaging the enamel surface and changing its original morphology. The rough surface inhibits proper cleaning, invites plaque deposition, bacterial r...

    Authors: Priyanka Shah, Padmaja Sharma, Santosh Kumar Goje, Nikita Kanzariya and Maitry Parikh
    Citation: Progress in Orthodontics 2019 20:18
    Content type: Research Published on:

  45. Contamination of orthodontic appliances is due to the unhygienic practices followed during manufacturing and packaging processes, which may lead to cross-contamination. Although literature has indicated the ne...

    Authors: P. R. Vivek Aithal, K. R. Akshai Shetty, M. R. Dinesh, B. C. Amarnath, C. S. Prashanth and Mathew David Roopak
    Citation: Progress in Orthodontics 2019 20:17
    Content type: Research Published on:

  46. The aim of the study is to assess the clinical effect of an antibacterial monomer-containing primer on preventing white spot lesions (WSLs) during fixed orthodontic treatment.

    Authors: Aslihan Zeynep Oz, Abdullah Alper Oz, Sabahat Yazicioglu and Ozlem Sancaktar
    Citation: Progress in Orthodontics 2019 20:15
    Content type: Research Published on:

  48. The use of face mask for early treatment of class III malocclusion has proven to be successful, but its compliance and related dental side effects have always been a problem. To overcome this, a new approach h...

    Authors: Rohit A. Minase, Wasundhara A. Bhad and Umal H. Doshi
    Citation: Progress in Orthodontics 2019 20:14
    Content type: Research Published on:

  49. The root resorption of the maxillary incisors after the orthodontic traction of impacted canines is a concern for clinicians. The aim of this case series report was to evaluate the root resorption of the maxil...

    Authors: Luis Ernesto Arriola-Guillén, Yalil Augusto Rodríguez-Cárdenas, Gustavo Armando Ruíz-Mora, Aron Aliaga-Del Castillo, Juan Schilling and Heraldo Luis Dias-Da Silveira
    Citation: Progress in Orthodontics 2019 20:13
    Content type: Short report Published on:

  50. Dental caries is a polymicrobial disease and prevalent among cleft lip and palate (CLP) patients, although their oral hygiene is well maintained. Dysbiosis, the state of imbalance within the dental plaque micr...

    Authors: Kenta Funahashi, Takahiko Shiba, Takayasu Watanabe, Keiko Muramoto, Yasuo Takeuchi, Takuya Ogawa, Yuichi Izumi, Tsutomu Sekizaki, Ichiro Nakagawa and Keiji Moriyama
    Citation: Progress in Orthodontics 2019 20:11
    Content type: Research Published on:
Submit manuscript

Official journal of

  • sido logo

Annual Journal Metrics

  • ISSN: 2196-1042 (electronic)