Page 4 of 10
To compare dentoskeletal changes produced by the maxillary splint headgear and cervical headgear appliance during the early phase of Class II treatment, specially the initial overjet and upper incisors position.
The aim of the present study was to assess if genetic polymorphisms in tooth agenesis (TA)-related genes are associated with craniofacial morphological patterns.
Correcting posterior crossbite in adult patients using nonsurgical methods may involve buccolingual tooth movement. Knowing the extent of the pretreatment alveolar bony dehiscences and fenestrations in the pos...
The present study aimed to evaluate the effect of MOP over a 3-month period and to determine the influence of the number of perforations on the rate of canine retraction. In addition, the amount of pain and di...
The objective was to analyze clinical, microbiological, and immunological periodontal parameters in patients in corrective orthodontic treatment.
In dental implantology, the development of stability over time is a well-investigated topic. In case of orthodontic mini-implants, quantitative data for long-term stability is not available yet. This study aim...
Fluorescent agents are added to orthodontic adhesives with the aim of making them visible under ultraviolet (UV) light, which ensures the complete, safe removal of remnants after orthodontic treatment. However...
To assess if there is any difference in pain levels between orthodontic treatment with clear aligners or fixed appliances.
The aims of this cross-sectional study were to investigate the regulatory compliance of Dutch practice websites offering orthodontic services, readability of the available treatment information, website design...
Fixed appliances have been the mainstream for orthodontic treatment, while clear aligners, such as Invisalign system, have become increasingly popular. The prevalence of apical root resorption (ARR) in patient...
Maxillary incisor protrusion is a prevalent dental deformity and is often treated by upper incisor intrusion and retraction. The mechanical loading triggers the resorption and apposition of the bone. Alveolar ...
To compare the clinical efficiency of premium heat-activated copper nickel-titanium (Tanzo Cu-NiTi) and NT3 superelastic NiTi during initial orthodontic alignment.
To assess the anatomy of the mandibular buccal shelf (MBS) with cone-beam computed tomography (CBCT) and to identify the region of miniscrew implantation for the distalization of mandibular dentition.
The aim of this study was to evaluate the effect of different nose types on the perception of facial aesthetics following camouflage treatment and orthognathic surgery for skeletal class II female patients.
To assess the perceived facial changes in class II division 1, convex profile patients treated with functional followed by fixed orthodontic appliances.
The aim of the study was to assess the accuracy of commercially available software in estimating anterior tooth root inclination from digital impressions of the crowns of the teeth.
Growth and development can be determined by cervical vertebrae stages that were defined on the cephalometric radiograph. Artificial intelligence has the ability to perform a variety of activities, such as pred...
Since the introduction of cone-beam computed tomography (CBCT) in dentistry, this technology has enabled distortion-free three-dimensional cephalometric analysis for orthodontic and orthognathic surgery diagno...
This study aims to develop a novel process to establish a standardized manufacturing technique of customized esthetic ceramic bracket system (CCB) which could be endowed with individual color and shape to sati...
The aim of this study was to evaluate the midpalatal suture maturation stages in adolescents and young adults using cone-beam computed tomography (CBCT).
The aim of this prospective case series study is to assess the three-dimensional (3D) skeletal and soft tissue effects of the alternate rapid maxillary expansion and constriction (Alt-RAMEC) protocol in conjun...
Clear aligners (CA) are among the most chosen orthodontic therapies for patients who require an invisible treatment. Previous studies showed that the thermoforming process and the complexity of the intraoral e...
The use of skeletal anchorage devices for maxillary protraction in patients with class III malocclusion due to deficiency in the middle third of the face has been shown to be a promising approach to treatment ...
Orthodontic treatment combined with a maxillomandibular advancement (MMA) can be an effective option for patients who need not only corrected occlusion but also facial rejuvenation. In this case series, two pa...
Correction of dentofacial deformities via orthodontics is an integral part of oral health as promotes optimal function, periodontal health, aesthetics and overall oral health-related quality of life. The aim o...
The aim of the current systematic review was to compare the radiologic effects of functional appliance Class II treatment compared to no treatment on the temporomandibular joint and its components.
Anxiety can cause difficulties during surgical procedures. The main objective of this study was to evaluate changes in patients’ anxiety and perceived pain levels after receiving audiovisual and verbal informa...
In the publication of this article [1], there is an error in the Materials and methods section.
The original article was published in Progress in Orthodontics 2019 20:23
.
The original article was published in Progress in Orthodontics 2019 20:25
The long-term evidence regarding failures of fixed retainers is limited and the aim of this cohort study was to assess the long-term risk of failure of one type of maxillary and two types of mandibular fixed l...
This study aims to compare the relationship between skeletal and dental outcomes of rapid maxillary expansion (RME) treatment on cone beam computed tomography (CBCT) images between pre-pubertal peak (pre-peak)...
To introduce an orthodontic bracket debonding device capable of measuring debonding force clinically by a novel sensor mechanism
To evaluate the three-dimensional (3D) changes after mandibular setback surgery (MSS) in skeletal Class III malocclusion using cone-beam computed tomography (CBCT) and a structured light-based scanner.
The Correction to this article has been published in Progress in Orthodontics 2019 20:30
The purpose of this study was to evaluate the treatment effectiveness of Carriere Distalizer in comparison to Class II intermaxillary elastics and Forsus.
The aim of this trial was to comparatively evaluate Icon® resin infiltration and Clinpro™ XT varnish in restoring aesthetics of white spot lesions (WSLs) present post-orthodontic treatment.
The Correction to this article has been published in Progress in Orthodontics 2019 20:31
To evaluate the risk of vertical alveolar bone loss (ABL) in mesialized mandibular permanent molars due to space closure in patients with unilateral second premolar agenesis. The contralateral side served as c...
Among the recent modalities introduced to accelerate orthodontic tooth movement (OTM) is micro-osteoperforations (MOPs), in other words, bone puncturing. The aim of this split-mouth trial was to investigate th...
To determine the discrepancy of crown-root morphology of central incisors among different types of skeletal malocclusion using cone-beam computed tomography (CBCT) and to provide guidance for proper torque exp...
To evaluate the success rate of orthodontic mini-implant (MI) in relation to implant characteristics, mainly implant distance to alveolar crestal bone (AC) and root proximity (RP) to adjacent teeth.
Orthodontic bonding and debonding procedures involve risk of damaging the enamel surface and changing its original morphology. The rough surface inhibits proper cleaning, invites plaque deposition, bacterial r...
Contamination of orthodontic appliances is due to the unhygienic practices followed during manufacturing and packaging processes, which may lead to cross-contamination. Although literature has indicated the ne...
The aim of the study is to assess the clinical effect of an antibacterial monomer-containing primer on preventing white spot lesions (WSLs) during fixed orthodontic treatment.
To investigate the effect of canine edge width and height on dental esthetics in maxillary canine substitution treatment.
The use of face mask for early treatment of class III malocclusion has proven to be successful, but its compliance and related dental side effects have always been a problem. To overcome this, a new approach h...
The root resorption of the maxillary incisors after the orthodontic traction of impacted canines is a concern for clinicians. The aim of this case series report was to evaluate the root resorption of the maxil...
Dental caries is a polymicrobial disease and prevalent among cleft lip and palate (CLP) patients, although their oral hygiene is well maintained. Dysbiosis, the state of imbalance within the dental plaque micr...
Marfan syndrome is a rare autosomal dominant inherited disease of the connective tissue associated with various craniofacial abnormalities. Aim of the present study was to assess the variability of palatal sha...
To evaluate differences between orthodontists and general dentists in experience with clear aligners (CA), patients’ demand and perception, types of patients, and malocclusion treated with CA and to compare th...
Anterior open bite is one of the most difficult malocclusions to treat and maintain in orthodontics. An effective treatment approach to correct anterior open bite is the intrusion of maxillary posterior teeth....
Citation Impact
3.247 - 2-year Impact Factor (2021)
3.782 - 5-year Impact Factor (2021)
1.811 - SNIP (Source-Normalized Impact per Paper)
0.949 - SJR (SCImago Journal Rank)
Speed
26 days to first decision for all manuscripts (Median)
60 days to first decision for reviewed manuscripts only (Median)
Usage
365,598 Downloads (2021)
56 Altmetric mentions (2021)
