Page 2 of 11
Maxillary molar distalization is a common technique used in the non-extraction treatment of Angle Class II malocclusion that can effectively correct the molar relationship and create spaces for anterior teeth ...
The objective of this study was to measure the forces and moments exerted by direct printed aligners (DPAs) with varying facial and lingual aligner surface thicknesses, in all three planes of space, during lin...
This study aimed at investigating the predatory publishing phenomenon in orthodontics by analyzing the content of unsolicited e-mail invitations received within 12 months.
Central incisor impaction is a rare condition with potentially severe clinical and psychological implications for the patient. Treatment techniques vary according to the pretreatment situation and individual f...
The introduction of bone-anchored maxillary protraction eliminated the side effects of facemask in the early treatment of patients with maxillary retrusion. This study aimed to evaluate the effects of miniscre...
Maxillary expansion in patients at the end of their growth relies on the possibility to use miniscrew supported expanders to apply expansion forces directly to the midpalatal suture. Although miniscrews provid...
The etiology of open bite is complex, involving various genetic or environmental factors. Several treatment alternatives have been suggested for the correction of open bite, yet their long-term effectiveness r...
The role of interdental widths and palatal morphology on the development of obstructive sleep apnea (OSA) has not been well investigated in adult patients yet. The aim of this paper was to assess the morpholog...
Long-term simulation of tooth movement is crucial for clear aligner (CA) treatment. This study aimed to investigate the effect of maxillary molar distalization with CA via an automatic staging simulation.
Dental crowding is the most prevalent malocclusion in the mixed and permanent detitions and can have a major impact on dentofacial esthetics. However, adjustments to the development and growth of the dentition...
Gingival phenotype plays an important role in dental diagnosis and treatment planning. Traditionally, determining the gingival phenotype is done by manual probing of the gingival soft tissues, an invasive and ...
The biomechanics generated by the clear aligner (CA) material changes continuously during orthodontic tooth movement, but this factor remains unknown during the computer-aid design process and the predictabili...
The predictability of incisor movement achieved by clear aligners among Class II division 2 patients is poorly understood. The aim of this retrospective study was to determine the effectiveness of clear aligne...
Surgical-assisted accelerated orthodontics (SAAO) has become very popular recently. Therefore, this study aimed to investigate the extent to which researchers adhere to Item 19 (harms) of the Consolidated Stan...
Occlusal stability is one of the goals of orthodontic treatment, and keeping teeth aligned in the long term is a challenge for the orthodontist. This study aimed to compare the long-term incisors irregularity ...
To evaluate by means of profilometric analysis and scanning electronic microscope (SEM) the effects on enamel surfaces of oscillating mechanical systems for interproximal enamel reduction (IPR). Fifteen comple...
To compare the effects of three different maxillary expansion appliances with five different types of expansion modalities on stress distribution and displacement on the maxilla and its adjacent craniofacial s...
To three-dimensionally analyse the stress distribution and displacement pattern in the maxillofacial complex following intrusion and distalization of the maxillary arch using finite element analysis in skeleta...
This study aimed to evaluate and compare the alveolar bone changes and to investigate the prevalence and severity of orthodontically induced inflammatory root resorption (OIIRR) of maxillary incisors in patien...
During the intrusion of lower incisors with clear aligners (CAs), root disengagement from the alveolar bone often occurs, resulting in serious complications. This study aimed to determine the potential force m...
Smile attractiveness is a primary factor for patients to seek orthodontic treatment, however, there is yet no systematic evaluation of this topic in the literature.
This study compared the skeletal and dental effects of a hybrid maxillary expander with mandibular miniplates (HE-MP) and Class III elastics to conventional tooth-borne rapid maxillary expander and face mask (...
The present study was designed to define: (1) which are the less predictable OTM with Invisalign aligners when the treatment plan is designed by expert operators, (2) if the presence and shape of attachments i...
The Correction to this article has been published in Progress in Orthodontics 2023 24:47
The incidence of open gingival embrasures (OGE) in patients after fixed appliance treatment is relatively high, while there are no detailed reports on patients after clear aligner therapy. Also, no clinical st...
Orthodontic tooth movement relies on bone remodeling and periodontal tissue regeneration in response to the complicated mechanical cues on the compressive and tensive side. In general, mechanical stimulus regu...
Tooth agenesis (TA) is the developmental absence of one or more teeth and is the most common craniofacial disorder in humans. Maxillary lateral incisor agenesis (MLIA) is a specific subtype of TA and can have ...
The purpose was to determine the predictability of tooth movements through clear aligner among premolar extraction patients and to explore the effects of various factors on tooth movements.
The aim of this study is to introduce a novel 3D cephalometric analysis (3DCA) and to validate its use in evaluating the reproducibility of virtual orthodontic-surgical planning (VOSP) in surgery-first approac...
Investigating the morphological and functional effects on mandibular asymmetry (MA) is important not only to understand the developmental process of masticatory dysfunction, but also to provide suggestions for...
It is thought that achieving a normal overjet may help to stabilise the alignment of the maxillary anterior dentition. Little’s Irregularity Index is limited in assessing discrete post-orthodontic changes, fai...
Scoping Reviews (ScRs) have emerged in the orthodontic literature as a new methodological perspective to collate and summarize scientific evidence. The aim of the present study was to identify and record the p...
To compare the three-dimensional (3-D) movement of maxillary teeth in response to three common miniscrew anchorage systems in extraction patients with maxillary dentoalveolar protrusion.
The aim of the study was to investigate the effect of three aligner cleaners on the composition and mechanical properties of two types of orthodontic aligners.
No systematic review and meta-analysis are present in the literature comparing patient-reported outcome measures (PROMs) in rapid maxillary expansion (RME) versus slow maxillary expansion (SME) in growing pati...
The study aimed to compare external root resorption (ERR) three-dimensionally in subjects treated with tooth-borne (TB) versus bone-borne (BB) rapid maxillary expansion (RME). Forty subjects who received tooth...
The purpose of the study was to measure the forces delivered by direct-printed aligners (DPA) in the vertical dimension and compare the force profile with traditional thermoformed aligners (TFA) and to investi...
To assess the predictability of crowding resolution and the efficacy of different strategies to gain space during clear aligners treatment.
With advances in digital technology, new types of lingual fixed retainers are being developed. However, there are few studies that quantitatively evaluate the accuracy and stability of lingual fixed retainers....
Clear aligner (CA) treatment has been gaining popularity, but the biomechanical effects of CAs in bimaxillary dentition have not been thoroughly investigated. Direct and indirect strong anchorages are two comm...
Uprighting incisors is particularly important with clear aligner therapy as incisor tip determines the mesio-distal space needed in the arch, and consequently the fit of the aligner. The objective of this stud...
This study aimed to three-dimensionally evaluate the qualitative and quantitative maxillary basal, dentoalveolar, and dental dimensions in patients with unilateral or bilateral maxillary impacted canines relat...
Midpalatal suture (MPS) repair in growing patients after RPE has been previously reported. However, differences between young and adult patients for timing and pattern of MPS repair after rapid maxillary expan...
Eruption disturbances of permanent molars are uncommon; however, it is important to treat them as soon as they are diagnosed. The main objective was to analyze the effectiveness of the “miniscrew-supported pol...
The purpose of this study was to assess the effectiveness of training residents in an orthodontic program in the placement of miniscrews by using cone beam computed tomography (CBCT) images. A total of 90 mini...
Regardless of the treatment protocol, stability in Class III patients always represents a major concern. The aim of this study was to assess the short and long-term skeletal and dentoalveolar modifications in ...
This study aims to evaluate the impact of the loss of permanent molars on the duration of orthodontic treatment for space closure and without skeletal anchorage.
Several aspects of the orthodontic routine seem to have been affected since the emergence of SARS-CoV-2. We aimed to evaluate the impact of the COVID-19 pandemic on the duration of fixed orthodontic treatment.
When the indirect bonding technique was developed in 1972 by Silverman and Cohen, many authors wondered whether this technique would improve bracket positioning accuracy compared to the direct bonding techniqu...
To evaluate the morphological and positional changes of mandibular condyle after miniscrew-assisted rapid palatal expansion (MARPE) in skeletal Class III malocclusion adult patients with horizontal mandibular ...
To compare the clinical effectiveness of Hawley retainers (HRs) and modified vacuum-formed retainers (mVFRs) with palatal coverage in maintaining transverse expansion throughout a 24-month retention period and...
2022 Citation Impact
4.8 - 2-year Impact Factor
5.0 - 5-year Impact Factor
1.980 - SNIP (Source Normalized Impact per Paper)
0.999 - SJR (SCImago Journal Rank)
2023 Speed
10 days submission to first editorial decision for all manuscripts (Median)
117 days submission to accept (Median)
2023 Usage
590,126 downloads
101 Altmetric mentions
