Page 2 of 11
Midpalatal suture (MPS) repair in growing patients after RPE has been previously reported. However, differences between young and adult patients for timing and pattern of MPS repair after rapid maxillary expan...
Eruption disturbances of permanent molars are uncommon; however, it is important to treat them as soon as they are diagnosed. The main objective was to analyze the effectiveness of the “miniscrew-supported pol...
The purpose of this study was to assess the effectiveness of training residents in an orthodontic program in the placement of miniscrews by using cone beam computed tomography (CBCT) images. A total of 90 mini...
Regardless of the treatment protocol, stability in Class III patients always represents a major concern. The aim of this study was to assess the short and long-term skeletal and dentoalveolar modifications in ...
This study aims to evaluate the impact of the loss of permanent molars on the duration of orthodontic treatment for space closure and without skeletal anchorage.
Several aspects of the orthodontic routine seem to have been affected since the emergence of SARS-CoV-2. We aimed to evaluate the impact of the COVID-19 pandemic on the duration of fixed orthodontic treatment.
When the indirect bonding technique was developed in 1972 by Silverman and Cohen, many authors wondered whether this technique would improve bracket positioning accuracy compared to the direct bonding techniqu...
To evaluate the morphological and positional changes of mandibular condyle after miniscrew-assisted rapid palatal expansion (MARPE) in skeletal Class III malocclusion adult patients with horizontal mandibular ...
To compare the clinical effectiveness of Hawley retainers (HRs) and modified vacuum-formed retainers (mVFRs) with palatal coverage in maintaining transverse expansion throughout a 24-month retention period and...
The introduction in the orthodontic field of the digital workflow for guided insertion of palatal TADs and the development of the 1-visit protocol led to the reduction of chair time and the possibility of comp...
To perform a case series analysis of the changes in the pulmonary artery systolic pressure (PASP), nasal inspiratory flow (NIF), upper airway volume, obstructive apnea/hypopnea index (OAHI), and the maxilloman...
Clear aligner treatment has become popular over recent years. It is necessary to identify methods by which we could avoid the bowing effect in extractions with clear aligner. The present study was to identify ...
Estimating skeletal maturation and growth potential is essential for developing adolescents' best orthodontic treatment plan. The purpose of this study was to compare the duration of adolescent growth peak in ...
The original article was published in Progress in Orthodontics 2022 23:19
To compare a new “guide for borderline orthodontic need” (GBON) with the “aesthetic component” (AC) of the IOTN in assessing borderline cases (dental health component DHC 3), and to compare reliability and opi...
Emoji are pictograms frequently used in social networks capable of expressing emotions. These tools can provide insights into people's behavior that could not be obtained with the use of textual communication. Re...
This study aimed to evaluate the displacement and stress distribution of mandibular dentition by various positions of the Class II elastics during en-masse retraction in clear aligner therapy.
The purpose of the present in vivo study was to compare the accuracy, in terms of trueness, between full-arch digital impressions of different intraoral scanning systems, using as a reference the ideality of t...
Fluoride has a major role in strengthening the structure of enamel against acids. Despite differences between caries and root resorption processes, both events inherently involve acidic dissolution of dental t...
The stability of the transverse expansion in passive self-ligating bracket treatments is a debated topic in orthodontics. However, to date, only 3 reports are available in the literature, with the maximum foll...
The Correction to this article has been published in Progress in Orthodontics 2022 23:34
Several semi-automatic software are available for the three-dimensional reconstruction of the airway from DICOM files. The aim of this study was to evaluate the accuracy of the segmentation of the upper airway...
The use of palatal miniscrew offers the possibility to improve the effectiveness of orthodontic expansion devices. Palatal expanders supported by miniscrew can be applied with different clinical protocols. Som...
To compare the fluorescent properties of 6 different orthodontic adhesives and provide useful information for clinicians in the adhesion choice, in order to remove it easily at the end of orthodontic treatment...
This study aimed to assess the distribution of non-carious cervical lesions (NCCLs) by tooth type, investigate the prevalence of NCCLs in patients undergoing orthodontic treatment, and identify the possible as...
This study aimed to evaluate the accuracy of deep learning-based integrated tooth models (ITMs) by merging intraoral scans and cone-beam computed tomography (CBCT) scans for three-dimensional (3D) evaluation o...
Prospective evaluation of the maxillary canine mobility during retraction using two different force levels over 5 months of retraction.
To produce a guide for dentists and orthodontists to determine orthodontic treatment need in borderline cases (dental health component DHC 3) and to compare views of different panels of judges on treatment need.
Since their introduction in orthodontics, clear aligners have been appreciated by patients, including adults, for their comfort and low aesthetic impact. Despite the enormous mobilization of financial resource...
Mini-screws are widely used as temporary anchorages in orthodontic treatment, but have the disadvantage of showing a high failure rate of about 10%. Therefore, orthodontic mini-screws should have high biocompa...
White spot lesion (WSL) is the most common consequence during and after orthodontic treatment. This study was conducted to investigate the ability of casein phosphopeptide amorphous calcium phosphate (CPP-ACP)...
To investigate the accuracy of three different 3D digital model registration software for tip, torque and rotation measurements, with reference to a 3D digital virtual setup. Twenty maxillary and mandibular pr...
To evaluate the correspondence between the interproximal reduction (IPR) performed clinically and that programmed in ClinCheck® and further assess which teeth showed an amount of implemented IPR (I-IPR) that c...
Orthodontic treatment procedures like separator placement, archwire placement, orthodontic force application, miniscrew placement and debonding procedure usually involve pain and discomfort. Pain perception an...
Three-dimensional (3D) printing technology is an emerging manufacturing process for many orthodontic appliances, and the aim of this study was to evaluate the mechanical properties of resin-based materials as ...
This systematic review and meta-analysis aimed to critically appraise the available evidence of the effectiveness of early intervention of functional unilateral posterior crossbites (FPXB) between the ages of ...
Transverse maxillary deficiency is a high prevalent growth disorder within the adult population that may lead to serious health issues, such as detrimental malocclusions and higher risk of developing obstructi...
Smile esthetics has a strong influence on perception, attractiveness, and personal characteristics. It is unknown how malocclusions may influence the appearance of the individual's smile. This study aimed to i...
Bruxism is defined as repetitive jaw-muscle activity characterized by the grinding and clenching of teeth. The prevalence of bruxism in children is extensive, and it can cause irregularities in dental arches. ...
Constricted maxillary bone is a common skeletal deformity, which may lead to crowding and posterior crossbite. Mid-palatal suture expansion is often used to increase the maxillary width, but its skeletal effec...
To evaluate the long-term outcomes of Class II treatment with the Jasper Jumper appliance and comprehensive orthodontic treatment concerning inclination of the mandibular incisors and gingival recession.
This study aimed to evaluate the short-term oropharyngeal airway volumetric changes in growing Class III maxillary-deficient patients treated by facemask without expansion compared with untreated Class III con...
To detect the optimal timing of intervention based on different cervical vertebral maturation stage (CS1-2 vs. CS3-4) for the treatment of Class III malocclusion with early Class III protocol.
Understanding the issues concerning the conducting of virtual orthodontic learning sessions (VOLSs) is essential. This study aims to identify attendees- and host-related aspects that could optimise learning an...
The purpose of this 2-arm-parallel split-mouth trial was to evaluate and compare the extent of possible root resorption using dentin phosphoprotein levels in gingival crevicular fluid between controlled contin...
A systematic review of the evidence should be undertaken to support the justification for undertaking a clinical trial. The aim of this study was to examine whether reports of orthodontic Randomised Clinical T...
Primary failure of eruption (PFE) is a hereditary condition, and linkage with variants in the PTH1R gene has been demonstrated in many cases. The clinical severity and expression of PFE is variable, and the genot...
This study investigated the safety of orthodontic anchor screw (OAS) placement by examining the morphology and degree of depression of the maxillary sinus adjacent to the alveolar bone between the maxillary mo...
Nowadays, CAD/CAM technologies enrich orthodontics in several ways. While they are commonly used for diagnoses and treatment planning, they can also be applied to create individualized bracket systems. The pur...
Although preformed archwires with a variety of arch forms are currently commercially available, the effects of variation in the shape of these archwires on the orthodontic force at each tooth are not well unde...
Malocclusion is a condition frequently seen in primary dentition due to the interaction of environmental, genetic and behavioural factors. The occurrence of some types of malocclusions can have an impact on or...
2022 Citation Impact
4.8 - 2-year Impact Factor
5.0 - 5-year Impact Factor
1.980 - SNIP (Source Normalized Impact per Paper)
0.999 - SJR (SCImago Journal Rank)
2022 Speed
12 days submission to first editorial decision for all manuscripts (Median)
96 days submission to accept (Median)
2022 Usage
391,829 downloads
118 Altmetric mentions
